|
Metallic anti-break-in
doors are designed for the protection of apartment doorways, office
buildings and other constructions from breaking in.
These doors satisfy the requirements of
the 4th and 5th class of break-in resistance. It also means that
they are considered to be bulletproof.
Design
Such door represents
a steel modular construction that consists of whole-bent profiles
of door-frame and door leaf both having a decorative finish.
It is equipped with hidden steel hinges
(the thickness of metal is 6 mm) which provide its ability to resist
the impact of static and dynamic loads up to 1500 kg.
"Isover" mineral cotton is used
as lagging of door leaf except the area where girth rails are located:
a foam-rubber is used here. At the ledge between door leaf and door-frame
a heating tape is mounted.
The door is equipped with the next locking
devices: "Elbor-CISA", "Apeks-T72", "Mottura",
"KALE", etc. The minimal quantity of secrets of one of
the locks is not less than 25000.
There are different variants of decorative
finish and coating of door-frame and door leaf.
Metallic anti-break-in doors meet the requirements
of STB 51.2.04-99, TU Republic of Belarus 14547357, 003-99 and also
KD EK.142.00.000 that is proved by the certificates of conformity
of the mentioned products.
|
anti-break-in
doors 
